Stinger PRO 63cc SE With Pitts Muffler and O ring Seal

STINGER PRO 63cc SE With Pitts Muffler and O ring Seal

New ceramic plating cylinders will bring you incredible flying experience !

specifications

Type 2 cycle piston valve type gasoline engine for airplane
Displacement (cc) 63cc
Bore (mm) 47 mm
Recommended props 23X10,24X8,24X9,24X10
Maximum Output 6.5 Horsepower
Power supply 7.4V-14V
Carburetor : Walbro
Ignition : Stinger DC-CDI (Computer Controlled auto advance, electronic ignition system)
SPARK PLUG: NGK CM6
Requires: Gasoline, 2-cycle oil, ignition battery & propeller
speed rang : 1500-7500rpm
Gasoline-Version : Pre-mixed Fuel, 25-40 (Gasoline):1 (recommended : 32:1 for real oil, or 40:1 for synthetic oil)
Lubrication Oil : High quality fully synthetic 2 cylinder oil such as Motul 800 2T 100% synthetic racing motro oil , Red line two-stroke racing motor oil , Stihl Ultra high performance 2 cycle fully synthetic engine oil etc .
Break in Propeller : 24X9 (Standard Two blade prop)
Break in Gas/Oil Mix Ratio :40:1 for real oil, or 40:1 for synthetic oil
Cooling System : Air Cooled
RCGF Stinger Engine package Includes: electronic CDI ignition, muffler, spark plug, gaskets, bolts, throttle arm extension & manual.
Weight:
Engine: 1400g (50 oz)
Muffler: 170g (6.4 oz)
Ignition Module: 131g (4.4 oz)
Total: Weight: 1701g (60.8 oz)
Technical Data:
Ignition Battery: 7.4V-14VNiCd or NiMH, 7.4V LiFe or 2S LiPo pack
Gasoline/Oil Mix: 40:1 for synthetic oil
Replacement Spark Plug: NGK CM6 or equivalent
Idle Speed: 1500 rpm/min