Graupner Alpha 250 Race Copter FPV ARF/RFH
A new generation of race copters has arrived! The Graupner Alpha 250Q has been designed ready to fly right out of the box! No complex setup or building required. Just charge your batteries and the Alpha 250Q is ready for some wild racing!
The Alpha 250Q is built around a strong 3mm lightweight carbon competition frame, making it extremely durable during all flight phases. Parts are easily replaced as needed, requiring only basic tools. To assist with orientation during flight, a set of high intensity LED lights are mounted fore and aft. The Alpha 250Q is supplied with Graupner high efficiency C-Props which have been designed from the ground up to deliver better performance, less noise and longer flight times.
The firmware upgradeable 2.4GHz GR-18 telemetry flight controller and receiver provides a clean and trouble free installation. The copter transmitter and equipment are housed in a single sturdy case, leaving plenty of room for further expansion of the copter frame. Changing flight performance and PID controller settings can be done directly from the radio wherever you are. No computer or software needed to make any changes! Just use your radio to access the GR-18 controller which can also function as a 3-axis gyro aircraft stabilizer and helicopter flybarless flight controller. The GR-18 controller enables many multirotor configurations, providing an expansion path to different types of multirotors.
Safety is key when flying race copters and the Alpha 250Q provides the operator with many safety features for a worry free experience. Real-time information is constantly transmitted from the copter flight systems, providing voice notifications of main battery level, altitude, temperatures and radio signal strength, which are continuously monitored by the GR-18 controller. When an unsafe condition occurs such as flying out of range, busting FAA altitude or hitting a user definable low battery level, the operator is immediately notified.
The Alpha 250Q Race Coper provides different flight modes that can be switched during flight depending on user preferences and experience, accommodating any flying style. Flight behavior can be easily modified by changing the controller settings using the HoTT Over-The-Air radio interface available on any Graupner HoTT radio (6ch and up).
Flying the Alpha 250 race copter using FPV (First Pilot View) adds an additional thrill when racing. The installed FPV camera and 5.8GHz transmitter can be used with all common FPV goggles or LCD screens. As an extra benefit the Alpha 250 is provided with tilted camera cases for 0, 15 and 25 degrees angle to compensate for different racing attitudes.
The Alpha 250Q Race Copter can be expanded with many additional options such as a GPS module, canopies, Bluetooth for telemetry display on Smartphones and tablets, multi bladed props and much more!
ALPHA 250 COPTER FEATURES
Expertly built no assembly needed
Integrated triple mode receiver and flight controller
Selectable flight modes (beginner to expert)
Receiver with out-of-the-box built in telemetry (altitude, voltage, RF signal strength, Rx temperature)
Live voice telemetry announcements of flight data (any Graupner HoTT radio six channels and up)
Warning voice notifications of battery level, radio range and assigned maximum altitude
Over the air access for copter setup with any Graupner HoTT radio (6ch and up)
No computer or setup boxes needed to configure or operate
High resolution FPV camera with 0, 15, 25 degree tilt option
FPV 5.8GHz 15mW Transmitter
Powerful, lightning fast response Graupner Ultra 2300Kv motors
Graupner high performance copter C-Props
High frequency switching Graupner performance ESC s
Strong 3mm carbon motor frames and 2mm carbon chassis
Carbon vibration free camera mount
High intensity LED light system
External JST power bus for FPV equipment
Alpha 250Q Race Copter ARF/RFH
FPV camera and transmitter
Extra set of C-Props
Build your own web store with PrestoStore