Neptune Boat Plane V2 Nitro or electric
Now in stock
Now in stock
Neptune Boatplane V2
Neptune Boat Plane ARF V2 is the improved version of our previous Neptune. The new color scheme is much more brighter and more visible in the air.
Wing Span: 60 in
Wing Area: 713 Square in
Wing Loading: 21.8 oz/sq ft
Fuselage Length: 55 in
Engine required: 2c .46 or 4c .61
Prop required: 11x7
Radio required: 4C/5S
Dry Flying Weight: 6 lbs 2 oz
Recommend Uranus 35425, 60A ESC and 2 packs of 3S 2100 mAh 20C Li-Po batteries in parallel.
Neptune Boat Plane ARF V2 is the improved version of our previous Neptune. The new color scheme is much more brighter and more visible in the air. It is designed as a 40 size glow ARF, but it will be easy to convert to electric.
The engine pod assembly has been changed and now sits atop a carbon fiber tube. All wiring between the engine pod and fuselage are now able to fit through this tube. The new engine pod consists of 3 pieces: the cowl, the bottom piece (to hold the supplied fuel tank and your throttle servo), and the magnetic hatch/pod cover. These improvements help contribute to the V2ís lighter weight (the V1ís ARF weight was 6 lbs 8 oz and the V2ís dry flying weight is only 6 lbs 2 oz).
A special compartment and optional hatch have been added to the nose. The hatch arrives out-of-the-box covered-over. To access the compartment, simply cut the covering material covering the hatch. This makes it easy to use this compartment for your radioís battery or to add any necessary weight to adjust your Neptuneís CG. It is also the perfect location if you plan to install an onboard glow plug driver and battery in your Neptune.
The wing tip floats are now a bright red color. The V2 wing uses a Carbon fiber wing rod in place of the V1ís wooden wing joiner. The aileron servos are now safely located inside the fuselage (mounted near the center of the wing).
Build your own web store with PrestoStore