Smart-Fly SuperSwitchHD

SuperSwitchHD provides the same features as the SuperSwitch except for 18ga wire and a Deans UltraPlug output to mate
with the PowerExpander.

The unique features of this switch is the 18 gauge wire on the battery side with high-quality Deans connectors and the dual leads on the receiver side. This wire and connector combination allows you to mount your battery anywhere you want and you don't have to worry about voltage drops in long wire runs. This minimizes the voltage drop cause by wire resistance. At the high currents digital servos require from the battery this can actually be substantial. We have measured a half volt drop over eighteen inches of 22 gauge wire and one connector at 5.0 amps. On the receiver side, again one or both leads may be used but both leads is recommended so that your system see the full battery voltage.

The leads provided will fit any radio system brand. The receiver leads are JR style which will fit both Futaba and JR receivers.


Features:

Heavy, 18 gauge wire to battery terminals
Dual output connectors to receiver for low voltage drop
Universal connectors
Compatible with all radio systems
Compatible with Smart-Fly Regulators