Smart-Fly TurboReg regulator Smart-Fly TurboReg regulator
Smart-Fly TurboReg regulator
The Smart-Fly TurboReg is ideal for aircraft with engines larger 100cc size. All power input and output connectors are Deans Ultra Plugs to handle the high currents the TurboReg is capable of. The unit is will handle 17.5A continuous current but can handle peak currents in excess of 35A. The unit has dual battery inputs for redundancy and has a built-in BatShare to balance battery draw and prevent a bad battery pack from affect a good pack. It is meant to be used with 2-cell Li-ion or Li-Poly packs. It features adjustable voltage output from approximately 5.1V to 6.4V. The TurboReg is a perfect match with our PowerExpanders when a less expensive solution than our PowerSystems is desired. It supports the use of an optional failsafe switch. Features: Built-in BatShare Deans Ultra Plugs In & Out For use with 2-cell Lithium Packs Adjustable output voltage, ~5.1V-6.4V 17.5A continuous, 35A peaks ( 8.4 volts in & 6.0 volts out) Optional Failsafe Switch & Charge Package Available Lightweight: 2.0 oz Small size: 2-3/4 x 2-1/4 inches Failsafe-switch and charge package $19.95 CAUTION: When the regulator is operated with the optional failsafe-switch it presents a slight load to your battery even when off. This load is 0.4mAH or about 10mA out of your pack for each 24-hour period. You should disconnect the battery if you the plane will be sitting for more than a couple days.
Build your own web store with PrestoStore