JR Optically Isolated Kill Switch

Overview
JR - JRP03497 - TLS1-ISW Optically Isolated Kill Switch
Maintain complete control over your engine's safety and performance!

Not only are electronic kill switches a useful piece of safety equipment in your giant scale model, but in most cases, they're required to fly at an AMA sanctioned field or event.

Weighing less than 1/2 ounce, the compact TLS1-ISW is not only practical, but powerful as well. Not only does it provide a safe means to shut down your motor remotely through your transmitter, but it also provides live RPM telemetry data when connected to your engine's ignition pickup. Fly a four- cylinder engine such as the Desert Aircraft DA 200? The TLS1-ISW supports dual ignition inputs, so controlling two separate ignition modules is a breeze from a single device. A programmable RF link delay will prevent your engine from shutting down from a momentary hold, eliminating a very embarrassing and costly situation if a forced landing is made off of the runway. Finally, the included status condition LED installed in your model will give you a 100% clear status of your ignition's power, for simple, smart operation.

Save the gambling for the casino. Install a TLS1-ISW in your model and hedge your bet against an accident.

Features
JR - JRP03497 - TLS1-ISW Optically Isolated Kill Switch
Integrated internal regulator can take up to 12.6v DC power input (3S LiPo) for maximum flexibility
Selectable 6.0v or 7.4v output with included jumper
Dual ignition support makes setup for complex four-cylinder engines such as the DA 200 simple.
Compatible with XBus and PWM inputs
Plug inline with ignition pickup to monitor RPM live through your DMSS transmitter.
Switch on and off remotely through your transmitter.
Programmable delay will prevent engine shutdown from a momentary RF hold.
Status condition LED shows ignition power on or off.